Special Design for 20 Ton Hydraulic Press Cylinder - Multistage Hydraulic Cylinder (RK Series) – Canete

Short Description:

Where to Buy

For inquiries about our products or pricelist, please leave your email to us and we will be in touch within 24 hours.

Send Email

Where to Contact

For inquiries about our products or pricelist, please leave your email to us and we will be in touch within 24 hours.

We have now numerous great personnel members good at advertising, QC, and working with kinds of troublesome dilemma from the creation course of action for Two Jaw Gear Puller, Long Ram Hydraulic Cylinder, Hydraulic Pump, If you are interested in any of our products or would like to discuss a custom order, please feel free to contact us. We are looking forward to forming successful business relationships with new clients around the world in the near future.

Special Design for 20 Ton Hydraulic Press Cylinder - Multistage Hydraulic Cylinder (RK Series) – Canete Detail:

Field Applications

Maximum working pressure: 70MPa

The graded hydraulic cylinder breaks through its own travel limit, and heavy objects are lifted through the grading

Meet the requirements of a large lifting height

Supporting the synchronous hydraulic lifting system, it can realize the high-precision classification synchronous lifting

Synchronization accuracy up to 1%

The carrying capacity is from 250 tons to 1000 tons, and the single point bearing capacity is large

Double-acting design, the selection of special lifting valve group for jacking ensures the safety of lifting and descending

A 5° spherical saddle is standard to accommodate uneven load surfaces

Polymer synthetic gaskets can be selected, which are light in weight and strong, reducing the labor intensity of on-site workers

All models are equipped with 3/8-18NPT ultra-high pressure quick couplings and high strength aluminum titanium threaded protective sleeves


Step 1: Place the Stage-lift Hydraulic Cylinder on a solid support under load (plunger retracted).	Step 2: Lift the load and insert 2 pads under the chassis.	Step 3: Retract the plunger and insert 2 pads in the center of the chassis to support the next lift.	Step 4: Lift the load again, and insert 2 blocks under the chassis again.